Timeout occured after PPS Procedure
Operating Voltage =  1.8
Command Protocol =  2
Timeout occured waiting for response from the card
A command is in progress
The command is an Internal command
cmd_ptr->hdr.count :  1
The command is :  0x102
The command protocol is :  0x2
Signals pending in uim TCB are :  0x200
UIM Task currently is interested in signals :  0x765FD
Num atr bytes is 14
ATR : 0x3b 0x9a 0x18 0x0 0x92 0x1 0x54 0x94 0x3 0x7 0x9 0x3 0x19 0x2 
Running with FI = 372, DI = 12 
Calculated timeout value is 1055 
uim_rx_state is :  0
uim_tx_state is :  1
This command expects data - Expecting  22 Bytes
We have received 0 Bytes
Bytes received :
APDU being sent :0xa0 0xf2 0x0 0x0 0x16 
Current position in the buffer is :  6 value 0xff
UART STATUS is :  0xC
