Timeout occured after PPS Procedure
Operating Voltage =  1.8
Command Protocol =  4
Timeout occured waiting for response from the card
A command is in progress
The command is an Internal command
cmd_ptr->hdr.count :  1
The command is :  0x102
The command protocol is :  0x4
Signals pending in uim TCB are :  0x200
UIM Task currently is interested in signals :  0x765FD
Num atr bytes is 22
ATR : 0x3b 0x9f 0x95 0x80 0x1f 0xc7 0x80 0x31 0xe0 0x73 0xfe 0x21 0x1b 0x57 0x3f 0x86 0x60 0x46 0x83 0x0 0x0 0xff 
Running with FI = 512, DI = 16 
Calculated timeout value is 1450 
uim_rx_state is :  0
uim_tx_state is :  1
Command is sent but not the data
APDU being sent :0x80 0xf2 0x0 0xc 0x0 
Current position in the buffer is :  5 value 0x0
UART STATUS is :  0xC
