Timeout occured after PPS Procedure
Operating Voltage =  1.8
Command Protocol =  4
Timeout occured waiting for response from the card
A command is in progress
The command is an External command  With the call back function pointing to  0xE8D19D
cmd_ptr->hdr.count :  1
The command is :  0x116
The command protocol is :  0x4
Signals pending in uim TCB are :  0x200
UIM Task currently is interested in signals :  0x765FD
Num atr bytes is 22
ATR : 0x3b 0x9f 0x95 0x80 0x1f 0xc7 0x80 0x31 0xe0 0x73 0xfe 0x21 0x13 0x57 0x4a 0x33 0x5 0x2b 0x32 0x34 0x0 0xba 
Running with FI = 512, DI = 16 
Calculated timeout value is 1450 
uim_rx_state is :  0
uim_tx_state is :  1
Command is sent but not the data
APDU being sent :0x0 0xa4 0x0 0x4 0x2 0x3f 0x0 
Current position in the buffer is :  5 value 0x2
UART STATUS is :  0xC
