Timeout occured after PPS Procedure
Operating Voltage =  3.0
Command Protocol =  2
Timeout occured waiting for response from the card
A command is in progress
The command is an Internal command
cmd_ptr->hdr.count :  1
The command is :  0x103
The command protocol is :  0x2
Signals pending in uim TCB are :  0x200
UIM Task currently is interested in signals :  0x765FD
Num atr bytes is 17
ATR : 0x3b 0x3d 0x95 0x0 0x24 0xe 0x0 0x96 0x0 0x0 0x86 0x60 0x3e 0x3c 0x8 0x6 0x7 
Running with FI = 512, DI = 16 
Calculated timeout value is 1450 
uim_rx_state is :  0
uim_tx_state is :  1
Command is sent but not the data
APDU being sent :0xa0 0xa4 0x0 0x0 0x2 0x6f 0x37 
Current position in the buffer is :  5 value 0x2
UART STATUS is :  0xC
